* IMPROVE WORKER'S TECHNOLOGY AND INCREASE THE PRODUCTION OF GOOD RESULT.
SCREW MANAGER IS DECTING THE NG, AND INCREASING EVERY WORKER'S PRODUCTIVITY.

* INCREASE THE WORKER'S TECHNOLOGY.
SCREW MANAGER IS INDICATING AND MANAGING THE SCREW FASTENING TIME,
IT IS POSSIBLE TO WORK HIGH LEVEL OF TECHNOLOGY.

* CLOSE TO EXPERT'S TECHNOLOGY
SCREW MANAGER IS SENSING AND MANAGING THE DIGITILIZED DATA RELATING THE EXPERT'S SCREW FASTENING TECHNOLOGY.
JUST WORK FOLLOING TO SCREW MANAGER'S SETTING, YOU CAN BE CLOSER TO THE EXPERT LEVEL OF TECHNOLOGY.

*PREVENT FROM WORST TROUBLE OF LOT REJECTION BY USING WRONG SCREW.
SCREW MANAGER IS MONITORING THE TIMG OF FASTENING, FORCE TO STOP THE SCREWDRIVER, AND ALERT FOR THIS NG OF WRONG SCREW.

* REALIZE THE SYSTEMATIC WORK
SCREW MANAGER IS ENABLE WOKER TO DO THE SYSTEMATIC WORK BY SET THE DATA HOW
FAST IT SHOULD BE FASTENING, COUNT HOW MANY SCREW TO BE FASTENED.
HIGH LEVEL SENSING IS ALSO ENABLE TO CALCULATE THE EXACT COST.

SCREW MANAGER 達人 AND IDEKEIKI PAT. TECHNOLOGY.
SCREW MANGER 達人 IS REGISTERED TRADEMARK AND PATTENED FOR THE TECHNOLOGY BY IDEKEIKI : CONTROL AND MANAGEMENT OF SCREW
FASTENING TIME, TORQUE, WORKING PROCESS. SCREW MANAGER IS LESS THAN HALF COST OF HIGHER SPEC MODEL 301/400,
SCREW MANAGER IS EASIER TO USE FOR PRODUCTION LINE.

MANY FUNCTIONS

SCREW MANAGER IS MONITORING THE SCREW LENGTH BY THE SCREW FASTENING TIME.
EASY TO SET "SCREW TIME" THAT IT TAKES TO FASTENING FOR 1PC OF THE SCREW.

SENSING RANGE OF THE SCREW TIME: 1/100 SEC.
EASY TO SET "SP VALUE" AS SET IN PERCENT FOR THRESHOLD AMOUNT.
OUTPUT LOG FUNCTION HELP THE TRACEABILITY.
MANY KINDS OF SCREW MANAGER FOR MANY HIOS AND DELVO SCREWDRIVERS ARE AVAILABLE.

AUTOMATIC STOPPING FUNCTION

*IF THE SCREW FASTENING TIME IS OVER OR LESS THAN SP VALUE,
SCREW MANAGER WILL FOURCE TO STOP THE SCREWDRIVER WORKING AND ALART AS "NG".
PREVENT FROM CRUCH THE PART UNDER THE TARGET WORK BY FASTENING FOR WRONG LONGER LENGTH SCREW.

EXTRNAL CONNECTION

REMOTE FUNCTION:IT CAN BE RESET FROM NG BY REMOTELY OPERATION NOT PUSHING THE SWITCH BUTTON.
START FUNCTION: UNTIL SET THE TARGET WORK, SCRWEDRIVER CANNOT BE STARTED TO WORK.
LINK FUNCTION:WHEN CONNECTION MULTIPLE UNIT(A,B,C) OF SCREW MANAGER, IT CAN BE MANAGED THAT A CONNECTED SCREWDRIVER CAN BE WORKED AND STOP TO WORK B & C CONNECTED SCREWDRIVERS UNTILE A CONNNECTED SCREWDRIVER FINISH THE FASTENING.