Products
取扱商品

ANEX PRODUCTS

For Toys NO.33
For triangle Screws
Novelty, educational toys are using triangle head screw.

Model No. 33
▲2.0 x ▲2.2 x 25mm(L1) x 150L x grip (32×105)
Inner box: 6pcs per one Box

Model No. 33-B3 (3pcs bit set)
Bit: ▲1.6 x ▲2.3 x 150L
Bit: ▲2.0 x ▲2.2 x 150L
Bit: +1 x +2 x 150L
Grip & 3pcs bit set contain case

Model No. 33-TR1623 (Bit Only)
▲1.6 x ▲2.2 x 25mm(L1) x 150L x grip (32×105)
Mini Stubby
Mini Stubby
For narrow space
4 soft groove handle is useful for fastening

Model No. 59
Super Short bit No.2
No. 59-5B No.1, No.3, -6, & 2pcs of No.2
Super Short bit

Model No. 60
Super Short Bit No.2 x -6 2-way type

Model No. 61
Super Short Bit No.2 & Wide Handle

Model No. 62 (5pcs Bits & Handle)
No.1, No.3, -6 each 1pc & No.2 2pcs

No. 59 22mm Super Short Length

No. 61 Wide Handle

No. 60 2-way (+)&(-) Ended Bit type

Precision type

For Watch Wrist Band Pin
Use for Remove/Pushing it out

No. 67 Pin Remover (2.3×24)x98mmOL

No. 68 Pin Pushing (5×0.7)x75mmL

No. 68-P3 Dia 0.7, 0.8, & 0.9mm and Container Case

No. 67

No. 68

No. 68-P3

Precision type
For Rimless Glasses

No. 78 Nut fastening (1.5×40) x 85mmL

No. 79 (-) 1.8 , (+) 00, Nut fastening

No. 80 (-) 1.8, (+) 00, Nut Fastening & Key Holding Ring

NO. 84 Scratch Awl

No. 88W For Watch Wrist Band especially Leather made

No. 108 Pencil type (-)1.8 x (+) 00, Nut head can be turnable Hex [2.5mm] & Hex Lobe [2.5mm]

Precision type

For precision finger work.
It can be fastened by only fingers
No. 69 (-) 0.6mm
No. 70 (-) 0.9mm
No. 71 (-) 1.2mm
No. 72 (-) 1.8mm
No. 73 (-) 2.1mm
No. 74 (-) 2.3mm
No. 75 (-) 3.0mm
No. 76 (+) 00
No. 77 (+) 0
No. 85 (+)1
No. 86 T1 Hex Lobe
No. 87 T2 Hex Lobe

No. 69
No. 85

Precision type Set products

No. 700 (-) 0.9, 1.2, 1.8, 2.1, 2.3, 3.0 6pcs/set

No. 800 (-) 0.9, 1.2, 1.8, 2.1 (+)00, (+)0 6pcs/set

No. 900 (-)1.2, 1.8, 2.3, 3.0 & (+)00, (+) 0 6pcs/set

No. 930 (-)1.2, 1.8, 2.3, 3.0 & (+)00, (+) 0 6pcs/set

No. 935 (-)1.2, 1.8, 2.3, (+)00, (+) 0 & Box type for Glasses 6pcs/set

Pin Vise
Precision Work For making hole of PCB, Small models, beading, or etc…

No. 94 0.1 – 3.2mm & Drill Dia. 2.0, 2.5, & 3.0

No. 95-S 0.1 – 3.2mm & Drill Dia. 0.6, 0.8, & 1.0

No. 95 0.1 – 1.0mm 8mm dia x 97mmL

No. 97 0.1 – 3.2mm 10mm dia x 98mmL

No. 98 0.1 – 3.2mm 10mm dia x 102mmL

No. 98-R 0.1 – 3.2mm 10mm dia x 102mmL with Rubber Handle

Pin Vise
Precision Work For making hole of PCB, Small models, beading, or etc…

It can be used together with electric screwdrivers

No. 96 0.1 – 2.0mm 10mm dia x 65mmL (Shank 6.35mm)
No. 99 0.1 – 3.2mm & Drill Dia. 2.0, 2.5, & 3.0
Tweezers SUS304

No.200 Heavy-Duty 120mm
No.201 Round End 120mm
No.202 Fine End 120mm
No.203 Fine End small type 110mm
No.204 Fine and Sharped End 115mm
No.205 Fine and hook nose 115mm
No.206 Superfine type 140mm
No.207 Hook Nose 120mm
No.208L Long 500mm Straight
No.209L Long 500mm Carved

Tweezers SUS410
Rubber Grip Stainless Steel (SUS410)
Tweezers

No.210 Heavy-Duty 120mm
No.211 Round End 120mm
No.214 Fine and Sharped End 115mm
No.215 Fine and hook nose 115mm
No.217 Hook Nose 120mm
No.220 L-Hook end (1×2)130mm
No.221 Luce[pike] type 170mm
No.222 Brass Made 140mm
From left side, No. 211, No.214 & No. 215
No. 221 Luce [pike] type 170mm & No. 222 Brass Made type [*non magnetizing type]

Tweezers SUS410
Rubber Grip Stainless Steel (SUS410)
& Fluoro Resin Coated Tweezers

No.224 Fine and Sharped End 115mm
No.225 Fine and hook nose 115mm
No.226 Round End 120mm

Tweezers Nylon 66
Non magnetic, Insulation, for Anti-Chemical,
And Heat-Proof.
Nylon 66 Hard Glass Resin included Plastic Tweezers

No.230 Fine Ended 120mm
No.231 Round Ended 120mm
No.232 Bent Ended 120mm
No.233 Flat Narrow Ended 120mm
No.234 Flat Round Ended 120mm
No.230-5S (Above No. 230 to No.234 each 1pc)

Ratchet Screwdriver
“NEJIPITA” Special type Screwdriver Bit
It can be fastened for 4 kinds of screw head by 1pc bit. (+)1,2,3, & (-)6

Selector Switch
Fastening, Fix, & loosening are easy to be selected by one finger.
No. 290 (+)1,2,3 & (-6) Bit 45mm Length
& Interchangeable Ratchet Handle

No. 292 (+)1,2,3, & (-6) Bit 45mm & 110mm Length bit. Total 2pcs bit
& Interchangeable Ratchet Handle

Ratchet Screwdriver
No. 353 Flexible Shaft 190mm & Bit (+)2&(-)6 2way bit.

No. 370 (+)1 x (-) 4.5, (+2) x (-)6 2pcs bit.
& T-type ratchet handle grip

No. 353 Flexible shaft.
Note: Ratchet Handle is not included.
No. 370 (+)1 x (-) 4.5, (+2) x (-)6 2pcs bit.
& T-type ratchet handle grip

Ratchet Screwdriver
No. 306 Mini Stubby 60 Ratchet Screwdriver.
(+)2 x (-)6 x 30 Bits & Overall length 73mm

No. 395-D
Bit: (+)2 x (-)6 x 135
Overall Length: 190mm

60 teeth gear ratchet screwdriver,
Much smooth rotation makes high workability.

Ratchet Screwdriver
No. 316 Super Short Bit (+)2 x (-)6
Ratchet Handle body, support handle, special tool for rapid fastening.

No. 318 Multi Set
Contents: super short bit (+)1,2,3, (-)6
Hex Wrench Bit: H2.5 H3 H4 H5 H6
Socket bit: H5.5 H7 H8 H10 H12
Hex Lobu Bit: T10 T15 T20 T25 T27 T30 T40
Adaptor for Socket bit
Ratchet Handle body,
Support Handle
Special Tools for Rapid Fastening
Magnetic Holder

Ratchet type Mini Stubby Screwdriver &
Multi Set

For fastening at the much narrow space in an engine room of the car.

Magnetizing tools

N0.407 “MAG CATCH mini” 2pcs/set
For 6.35mm diameter shaft screwdrivers

No. 408 “MAG CATCH mini” 2pcs/set
For 4.5mm – 5.5mm diameter shaft screwdrivers

No. 400 “MAG CATCH”
Round Shaft: To 8mm diameter
Hex Shaft: Hex 6.35mm
No. 409 “MAG CATCH” for super short screwdriver.
Inner 7.3mm x Outer 15.5mm
Magnet Ring Type

Offset Ratchet
No. 426 Head up (-)6, (+)2
No. 426N Head up (+)1,2,3 (NEJIPITA) (+)2
No. 427S (-)6,(+)2 Socket adaptor,
H5.5, H7.0, H8.0, H10 (Socket)
No. 428 Head up (-)6,(+)1,(+)2 (2pcs),(+3)
No. 429 Head up (-)6, (+)1, (+)2,(+)3,

No. 425 Straight (-)6, (+)2 bit
No. 425-5B Straight (-)6,(+)1,(+)2 (2pcs),(+3)
No. 425-9B Straight (-)6, (+)1, (+)2,(+)3,
Hex 2.5, H3, H4, H5, H6

No. 436 Head Down (-)6, (+)2

Compact Ratchet 52
No.525 Ratchet Handle (+) 2
No.525-5B Ratchet Handle
(-)6/(+)1/(+2) 2pcs/(+)3
No. 525-M Ratchet Handle, MAG CATCH magnetizer, (+)2
No. 525-10B Ratchet Handle
(+)1/(+)2/(+)3, & (-) 6
Hex H2.5/3/4/6/8

No. 526 Ratchet Handle (Head up) (+)2

Ratchet gear handle has 52 teeth,
Smooth fastening at the narrow space.

IMPACT

No. 1902 Impact Screwdriver.

Screwdriver Handle & Bit Set with Hex 6.35 & Hex 8mm adaptor
Bit Contents:
For Hex 6.35mm (+)2 x 125 & (-) 6 x 125
For Hex 8mm (+) 2 x 36 (+) 3 x 36
(-) 8 x 36 (-) 10 x 36

Hammering the head of screwdriver, and the screwdriver start fastening by its impact.
Hit Fastening. Especially for fastening broken head of the screws.

Mini Impact
No. 1903 Impact Screwdriver.
Shank: Hex 6.35mm bit holder & (+) 2 x 30 bit

Set Items:
No. 1903-N above 1903 set contents plu Nejitori Bit for M3 – M6 screws

No. 1903-NS above 1903 set contents plu Nejitori “Slim” Bit for M2 – M4 screws

No. 1903-NS1 above 1903 set contents plu Nejitori Bit for M3-M6 & Nejitori Slim Bit for M2-M4 Screws, Nejitori Hex Bit for H1.5,2.0,2.5,3.0,4.0

For removing broken screws.
Use together with “NEJITORI” special bit,
It can be removed various broken screws

Electrical Tester

Function
DC 1.5 – 3.6V
AC 70 – 250V
Current Check (AC only)
Socket Earth Check
Conduction Test for DC circuit, Cell also
Electro Microwave Check [No-Contact]

No. 2145-L AC/DC & Voltage Checker
[LED & Buzzer Alert]

All function for household.
Adjust Switch for sensitivity [L, H, O]
Electrification of DC Circuit, Small Cell also can be check.
[Cell: LR44 2pcs in body]

Flexible Shaft

AFS Adjustable Flexible Shaft.
AFS-200 200mm
AFS-300 300mm
AFS-400 400mm
ALH LONG BIT HOLDER
ALH-250 250mm
ALH-350 350mm
ALH-450 450mm
ALH-600 600mm
ALHP LONG BIT HOLDER (Heavy Duty)
ALHP-100 100mm
ALHP-150 150mm
ALHP-300 300MM
For working at the corner, end of wall/ceiling, or narrow space.

L-Angle Adaptor

AKL-560 support handle (+)2×35 (+)2×45 bit
AKL-565 Support Handle (+)2×15 4pcs bit
AKL-565B3 (+)2X15 3pcs bit set
AKL-571 Support Handle, MAG CATCH 1pc,
And (+) 2 x 33 (double end) 1pc
AKL-P2033 (+)2×33 (double end) 2pcs set
AKL-P2035 (+)2×35 (double end) 2pcs set
AKL-SB3033 SQ■#3×33 (Single) 2pcs set
AK-50P-B4P(+)2×30 (Single) 4pcs & holder bit set

For working at the corner, end of wall/ceiling, or narrow space.

Precision

No. 3450
(-) 1.8, 2.5 x 50, 3 x 75
(+) 00 x50 & 0 x 75

ESD Safe type is also available.
No. 3450-ESD

And then,
No. 3470 series,
Special screw head of especially mobile.
There are 10 kinds of screwdriver end point

Handle has anti-oil, shock-absorbance, and conductive. Acetate Resin

Super Fit Precision

From Original Precise Size “000” triple zero type, to normal precision driver end.

Plus (3510to3515), Minus(3520to3524), Ballpoint (3530-3533), Hex Lobe (3540-3545) and Hexagonal Box (3550-3554) type are Available.

No. 3510 – 3515, 3520 – 3524, 3530 – 3533
3540 – 3545, 3550 – 3554
Insulation 1,000V type is also Available.

Interchangeable Precision Handle
No.3614 Set item: Handle & Screwdriver bit set (4pcs) Non-Magnetic type
(+)00x65mm, (+)0x65mm, (+)1x65mm, & (+)2x65mm.

No. 3610-H & 3610-ESD (ESD Safe model)
Right Side is 3610-ESD,
Left Side is 3610-H
These are the handle for screwdriver bit,
Any 6.35mm x 13mm Shank bits are applicable.

L-Screwdriver set
No.6070 for assembling furniture.
PZ2, PZ3, (+) 2 x (-) 6, (+)3 , (-) 7, H4, & H5
Bit Holder

No.6070-H Hex, Plus Minus Bit Set
H2.5, H3, H4, H5, H6, (+) 1 X (-) 4.5, (+)2 X (-) 6 & Bit Holder

No.6070-T Hex Lobe bit set
T10, T15, T25, T27, T30, T40
(also Applicable Tamper proof screw)
& Bit Holder

Slim Offset Screwdriver
For working at Narrow Space,
The size: L 108mm x W 16mm x H 10mm

No.6102
(+) 0x14, (+)1×10, (+)2×10,(-)6×10
No.6102-T 3Pcs Set
(+)1,2, & (-)6

No.6103 Hexagonal Wrench type
H2.5×10, H3.0x10, H4.0x10, H5.0x10
No.6103-F 4Pcs Set
H2.5, H3.0, H4.0, H5.0

Insulation 1000V
No. 7200　Short Circuit Protection 1000V
UNDER CONSTRUCTION

BACK TO “KOYO” PAGE