本文へ移動する場合はここでエンターキーを押してください。 ここから本文です。

HUGLE

"HUGLE" PEN-TYPE IONIZER MODEL 3080 G/ 3080C

TOYO PUMP BD TYPE

Effective removal of microscopic dust paricles caused by static electricity!!!

Features

Optimum: A O 1.5mm air outlet and concertrated fast airflow re most suitable to effectively remove microscopic dust particles. Also, the body color does not shine because it is black which is excellent for use in darkroom inspection precesses

 

Imput Power 100V - 115V, 50/60Hz, 0.27A
Pressure range 0.05-0.6Mpa (0.5 - 6.0Kgs/cm2)
Ambient Temperature 5℃ - 40 ℃ [41°F - 104°F]
Ambient humidity 35%RH - 65% RH [No condensation]
Gun Unit (weight) 0.5Kgs
Power supply unit(weight) 2.1Kgs

 

Performance

Pen part and controller part are connected by a low voltage cable (modular cable) for easy and simplified operation.

Safty

The internal safety circuit cuts off HV power when it dectects an abnormallity in the HV circuit.

Clean

Uses a 0.01μ Cartridge type filter.
 

Maintenance.

Very eash to clean the emitter needle and also replace it

Option

Polysilicon Emitter needle [Standard: Tungsten Emitter needle]

Footswitch

 

Model 3080G Pen Part Unit

Output Voltage 2000Vrms [volts root mean square]
Output Frequency 70 - 80kHz
Output Display During HV output LED (red) is ON
Amount of Air-Flow 10 - 34 L/min (gas presure 0.05 - 0.3Mpa)
Ambient Temperature 10℃ - 40℃
Ambient Humidity 35% RH - 65%RH [Non-Condensing]
weight 130g

Model 3080C Controller Unit

Input Voltage

DC24V

[Using an AC Adaptor: AC90V-AC264V 50/60Hz, Power Cord: For AC100V - AC120V]

Input Current [0.5A Max]
Output Voltage 2000Vrms
Output Frequency 70 - 80 kHz
Output Display During HV Output HV LED (green) is On
During Abnormality of HV ALARM LED (red) is On
Buzzer Operaion [can be truned On/Off]
Purge Gas 0.3MPa Max
[Pressure Speed Control is adjustable]
Ambient Temperature 0℃ - 40℃
Ambient Humidity 35% RH - 65%RH [Non-Condensing]
Weight 750g

Page Top