Page Top

ANEX product by slide

If you feel that the slide is slow,

One click can be shown the next page. 

Now, Totally 30 Pages has been made.

If you feel the slide is small,

You can see Full Screen Mode [ CTRL + SHIFT + "F"] Key after one click on slide part.

 

Original Page is HERE

 

 

The above file is "Slide Show",

Text source is as below:-

ANEX PRODUCTS For Toys NO.33 For triangle Screws Novelty, educational toys are using triangle head screw. Model No. 33 ▲2.0 x ▲2.2 x 25mm(L1) x 150L x grip (32x105) Inner box: 6pcs per one Box Model No. 33-B3 (3pcs bit set) Bit: ▲1.6 x ▲2.3 x 150L Bit: ▲2.0 x ▲2.2 x 150L Bit: +1 x +2 x 150L Grip & 3pcs bit set contain case Model No. 33-TR1623 (Bit Only) ▲1.6 x ▲2.2 x 25mm(L1) x 150L x grip (32x105) Mini Stubby Mini Stubby For narrow space 4 soft groove handle is useful for fastening Model No. 59 Super Short bit No.2 No. 59-5B No.1, No.3, -6, & 2pcs of No.2 Super Short bit Model No. 60 Super Short Bit No.2 x -6 2-way type Model No. 61 Super Short Bit No.2 & Wide Handle Model No. 62 (5pcs Bits & Handle) No.1, No.3, -6 each 1pc & No.2 2pcs No. 59 22mm Super Short Length No. 61 Wide Handle No. 60 2-way (+)&(-) Ended Bit type Precision type For Watch Wrist Band Pin Use for Remove/Pushing it out No. 67 Pin Remover (2.3x24)x98mmOL No. 68 Pin Pushing (5x0.7)x75mmL No. 68-P3 Dia 0.7, 0.8, & 0.9mm and Container Case No. 67 No. 68 No. 68-P3 Precision type For Rimless Glasses No. 78 Nut fastening (1.5x40) x 85mmL No. 79 (-) 1.8 , (+) 00, Nut fastening No. 80 (-) 1.8, (+) 00, Nut Fastening & Key Holding Ring NO. 84 Scratch Awl No. 88W For Watch Wrist Band especially Leather made No. 108 Pencil type (-)1.8 x (+) 00, Nut head can be turnable Hex [2.5mm] & Hex Lobe [2.5mm] Precision type For precision finger work. It can be fastened by only fingers No. 69 (-) 0.6mm No. 70 (-) 0.9mm No. 71 (-) 1.2mm No. 72 (-) 1.8mm No. 73 (-) 2.1mm No. 74 (-) 2.3mm No. 75 (-) 3.0mm No. 76 (+) 00 No. 77 (+) 0 No. 85 (+)1 No. 86 T1 Hex Lobe No. 87 T2 Hex Lobe No. 69 No. 85 Precision type Set products No. 700 (-) 0.9, 1.2, 1.8, 2.1, 2.3, 3.0 6pcs/set No. 800 (-) 0.9, 1.2, 1.8, 2.1 (+)00, (+)0 6pcs/set No. 900 (-)1.2, 1.8, 2.3, 3.0 & (+)00, (+) 0 6pcs/set No. 930 (-)1.2, 1.8, 2.3, 3.0 & (+)00, (+) 0 6pcs/set No. 935 (-)1.2, 1.8, 2.3, (+)00, (+) 0 & Box type for Glasses 6pcs/set Pin Vise Precision Work For making hole of PCB, Small models, beading, or etc... No. 94 0.1 - 3.2mm & Drill Dia. 2.0, 2.5, & 3.0 No. 95-S 0.1 - 3.2mm & Drill Dia. 0.6, 0.8, & 1.0 No. 95 0.1 - 1.0mm 8mm dia x 97mmL No. 97 0.1 - 3.2mm 10mm dia x 98mmL No. 98 0.1 - 3.2mm 10mm dia x 102mmL No. 98-R 0.1 - 3.2mm 10mm dia x 102mmL with Rubber Handle Pin Vise Precision Work For making hole of PCB, Small models, beading, or etc... It can be used together with electric screwdrivers No. 96 0.1 - 2.0mm 10mm dia x 65mmL (Shank 6.35mm) No. 99 0.1 - 3.2mm & Drill Dia. 2.0, 2.5, & 3.0 Tweezers SUS304 Precision worked 18-8 Stainless Steel (SUS 304) Tweezers No.200 Heavy-Duty 120mm No.201 Round End 120mm No.202 Fine End 120mm No.203 Fine End small type 110mm No.204 Fine and Sharped End 115mm No.205 Fine and hook nose 115mm No.206 Superfine type 140mm No.207 Hook Nose 120mm No.208L Long 500mm Straight No.209L Long 500mm Carved Tweezers SUS410 Rubber Grip Stainless Steel (SUS410) Tweezers No.210 Heavy-Duty 120mm No.211 Round End 120mm No.214 Fine and Sharped End 115mm No.215 Fine and hook nose 115mm No.217 Hook Nose 120mm No.220 L-Hook end (1x2)130mm No.221 Luce[pike] type 170mm No.222 Brass Made 140mm From left side, No. 211, No.214 & No. 215 No. 221 Luce [pike] type 170mm & No. 222 Brass Made type [*non magnetizing type] Tweezers SUS410 Rubber Grip Stainless Steel (SUS410) & Fluoro Resin Coated Tweezers No.224 Fine and Sharped End 115mm No.225 Fine and hook nose 115mm No.226 Round End 120mm Tweezers Nylon 66 Non magnetic, Insulation, for Anti-Chemical, And Heat-Proof. Nylon 66 Hard Glass Resin included Plastic Tweezers No.230 Fine Ended 120mm No.231 Round Ended 120mm No.232 Bent Ended 120mm No.233 Flat Narrow Ended 120mm No.234 Flat Round Ended 120mm No.230-5S (Above No. 230 to No.234 each 1pc) Ratchet Screwdriver “NEJIPITA” Special type Screwdriver Bit It can be fastened for 4 kinds of screw head by 1pc bit. (+)1,2,3, & (-)6 Selector Switch Fastening, Fix, & loosening are easy to be selected by one finger. No. 290 (+)1,2,3 & (-6) Bit 45mm Length & Interchangeable Ratchet Handle No. 292 (+)1,2,3, & (-6) Bit 45mm & 110mm Length bit. Total 2pcs bit & Interchangeable Ratchet Handle Ratchet Screwdriver No. 353 Flexible Shaft 190mm & Bit (+)2&(-)6 2way bit. No. 370 (+)1 x (-) 4.5, (+2) x (-)6 2pcs bit. & T-type ratchet handle grip No. 353 Flexible shaft. Note: Ratchet Handle is not included. No. 370 (+)1 x (-) 4.5, (+2) x (-)6 2pcs bit. & T-type ratchet handle grip Ratchet Screwdriver No. 306 Mini Stubby 60 Ratchet Screwdriver. (+)2 x (-)6 x 30 Bits & Overall length 73mm No. 395-D Bit: (+)2 x (-)6 x 135 Overall Length: 190mm 60 teeth gear ratchet screwdriver, Much smooth rotation makes high workability. Ratchet Screwdriver No. 316 Super Short Bit (+)2 x (-)6 Ratchet Handle body, support handle, special tool for rapid fastening. No. 318 Multi Set Contents: super short bit (+)1,2,3, (-)6 Hex Wrench Bit: H2.5 H3 H4 H5 H6 Socket bit: H5.5 H7 H8 H10 H12 Hex Lobu Bit: T10 T15 T20 T25 T27 T30 T40 Adaptor for Socket bit Ratchet Handle body, Support Handle Special Tools for Rapid Fastening Magnetic Holder Ratchet type Mini Stubby Screwdriver & Multi Set For fastening at the much narrow space in an engine room of the car. Magnetizing tools N0.407 “MAG CATCH mini” 2pcs/set For 6.35mm diameter shaft screwdrivers No. 408 “MAG CATCH mini” 2pcs/set For 4.5mm - 5.5mm diameter shaft screwdrivers No. 400 “MAG CATCH” Round Shaft: To 8mm diameter Hex Shaft: Hex 6.35mm No. 409 “MAG CATCH” for super short screwdriver. Inner 7.3mm x Outer 15.5mm Magnet Ring Type Offset Ratchet No. 426 Head up (-)6, (+)2 No. 426N Head up (+)1,2,3 (NEJIPITA) (+)2 No. 427S (-)6,(+)2 Socket adaptor, H5.5, H7.0, H8.0, H10 (Socket) No. 428 Head up (-)6,(+)1,(+)2 (2pcs),(+3) No. 429 Head up (-)6, (+)1, (+)2,(+)3, No. 425 Straight (-)6, (+)2 bit No. 425-5B Straight (-)6,(+)1,(+)2 (2pcs),(+3) No. 425-9B Straight (-)6, (+)1, (+)2,(+)3, Hex 2.5, H3, H4, H5, H6 No. 436 Head Down (-)6, (+)2 Compact Ratchet 52 No.525 Ratchet Handle (+) 2 No.525-5B Ratchet Handle (-)6/(+)1/(+2) 2pcs/(+)3 No. 525-M Ratchet Handle, MAG CATCH magnetizer, (+)2 No. 525-10B Ratchet Handle (+)1/(+)2/(+)3, & (-) 6 Hex H2.5/3/4/6/8 No. 526 Ratchet Handle (Head up) (+)2 Ratchet gear handle has 52 teeth, Smooth fastening at the narrow space. IMPACT No. 1902 Impact Screwdriver. Screwdriver Handle & Bit Set with Hex 6.35 & Hex 8mm adaptor Bit Contents: For Hex 6.35mm (+)2 x 125 & (-) 6 x 125 For Hex 8mm (+) 2 x 36 (+) 3 x 36 (-) 8 x 36 (-) 10 x 36 Hammering the head of screwdriver, and the screwdriver start fastening by its impact. Hit Fastening. Especially for fastening broken head of the screws. Mini Impact No. 1903 Impact Screwdriver. Shank: Hex 6.35mm bit holder & (+) 2 x 30 bit Set Items: No. 1903-N above 1903 set contents plu Nejitori Bit for M3 - M6 screws No. 1903-NS above 1903 set contents plu Nejitori “Slim” Bit for M2 - M4 screws No. 1903-NS1 above 1903 set contents plu Nejitori Bit for M3-M6 & Nejitori Slim Bit for M2-M4 Screws, Nejitori Hex Bit for H1.5,2.0,2.5,3.0,4.0 For removing broken screws. Use together with “NEJITORI” special bit, It can be removed various broken screws Electrical Tester Function DC 1.5 - 3.6V AC 70 - 250V Current Check (AC only) Socket Earth Check Conduction Test for DC circuit, Cell also Electro Microwave Check [No-Contact] No. 2145-L AC/DC & Voltage Checker [LED & Buzzer Alert] All function for household. Adjust Switch for sensitivity [L, H, O] Electrification of DC Circuit, Small Cell also can be check. [Cell: LR44 2pcs in body] Flexible Shaft AFS Adjustable Flexible Shaft. AFS-200 200mm AFS-300 300mm AFS-400 400mm ALH LONG BIT HOLDER ALH-250 250mm ALH-350 350mm ALH-450 450mm ALH-600 600mm ALHP LONG BIT HOLDER (Heavy Duty) ALHP-100 100mm ALHP-150 150mm ALHP-300 300MM For working at the corner, end of wall/ceiling, or narrow space. L-Angle Adaptor AKL-560 support handle (+)2x35 (+)2x45 bit AKL-565 Support Handle (+)2x15 4pcs bit AKL-565B3 (+)2X15 3pcs bit set AKL-571 Support Handle, MAG CATCH 1pc, And (+) 2 x 33 (double end) 1pc AKL-P2033 (+)2x33 (double end) 2pcs set AKL-P2035 (+)2x35 (double end) 2pcs set AKL-SB3033 SQ■#3x33 (Single) 2pcs set AK-50P-B4P(+)2x30 (Single) 4pcs & holder bit set For working at the corner, end of wall/ceiling, or narrow space. Precision No. 3450 (-) 1.8, 2.5 x 50, 3 x 75 (+) 00 x50 & 0 x 75 ESD Safe type is also available. No. 3450-ESD And then, No. 3470 series, Special screw head of especially mobile. There are 10 kinds of screwdriver end point Handle has anti-oil, shock-absorbance, and conductive. Acetate Resin Super Fit Precision From Original Precise Size “000” triple zero type, to normal precision driver end. Plus (3510to3515), Minus(3520to3524), Ballpoint (3530-3533), Hex Lobe (3540-3545) and Hexagonal Box (3550-3554) type are Available. No. 3510 - 3515, 3520 - 3524, 3530 - 3533 3540 - 3545, 3550 - 3554 Insulation 1,000V type is also Available. Interchangeable Precision Handle No.3614 Set item: Handle & Screwdriver bit set (4pcs) Non-Magnetic type (+)00x65mm, (+)0x65mm, (+)1x65mm, & (+)2x65mm. No. 3610-H & 3610-ESD (ESD Safe model) Right Side is 3610-ESD, Left Side is 3610-H These are the handle for screwdriver bit, Any 6.35mm x 13mm Shank bits are applicable. L-Screwdriver set No.6070 for assembling furniture. PZ2, PZ3, (+) 2 x (-) 6, (+)3 , (-) 7, H4, & H5 Bit Holder No.6070-H Hex, Plus Minus Bit Set H2.5, H3, H4, H5, H6, (+) 1 X (-) 4.5, (+)2 X (-) 6 & Bit Holder No.6070-T Hex Lobe bit set T10, T15, T25, T27, T30, T40 (also Applicable Tamper proof screw) & Bit Holder Slim Offset Screwdriver For working at Narrow Space, The size: L 108mm x W 16mm x H 10mm No.6102 (+) 0x14, (+)1x10, (+)2x10,(-)6x10 No.6102-T 3Pcs Set (+)1,2, & (-)6 No.6103 Hexagonal Wrench type H2.5x10, H3.0x10, H4.0x10, H5.0x10 No.6103-F 4Pcs Set H2.5, H3.0, H4.0, H5.0 Insulation 1000V No. 7200　Short Circuit Protection 1000V UNDER CONSTRUCTION BACK TO “KOYO” PAGE